|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for drainage in areas where waterproofing membrane is not required. Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe. One piece design does not allow for removal of the cover.
|
Rubber construction. 3/8? inner diameter, 3/4? outer diameter. Prevents leaks between shower arm and shower head. Includes three washers.
|
Rubber. For tip-toe style bathtub stoppers. 2-1/16" x 1" x 1/4".
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4-1/4" x 4-1/4" Stainless steel square tile ring. For use with the 151 Series Oatey drains.
|
Designed to fit 3-3/8" shower drains.
|
Steel construction, 2" diameter. Grid-style.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for drainage in areas where waterproofing membrane is not required. Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe. One piece design does not allow for removal of the cover.
|
Designed for drainage in areas where waterproofing membrane is not required. Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe. One piece design does not allow for removal of the cover.
|
For screw-on tile shower drains, 4" snap-in drains and 2" or 3" general purpose drains. Replacement for Oatey 42210, 42213, 42399, 42404, 42218, 42219, 43566, 43567, 43580, 43581, 43578, 43579. Bagged.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Adds a decorative flair to a basic tub spout. Covers gaps and holes. 3-5/8" OD, 2-1/4" ID.
|
Strainer dome cover with screw.
|
Adds a decorative flair to a basic tub spout. Covers gaps and holes. 3-5/8" OD, 2-1/4" ID.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Steel construction, use with 3-1/8" drains. Screws not included.
|
Round design with screw holes 2" center-to-center. Includes adapter to replace one or two hole plates. Screws included.
|
Chrome plated face plate screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Installs to standard 1/2" shower arms. 2.0 gpm flow rate.
|
2-15/16" diameter. Brushed nickel finish. Replaces Gerber no. 91-292.
|
Female threaded outlet, stainless steel grid, 3-1/2" flange diameter.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Adjustable Spray. Installs to standard 1/2" shower arm. 2.5 GPM flow rate.
|
Sized to slip over shower arm and has an adjustable set screw for a secure fit. Polished chrome finish.
|
Standard 1/2", Plastic. Overall length 7".
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Constructed of durable plastic. 1/2" IPS connection. 2.5 GPM.
|
Includes lift knob, repairs diverters in most tub spouts. Complete kit.
|
Brass construction, fits standard 1/2? IPS connection, small trickle of water reminds user to shut water off at shower handle when done. For use between shower arm and head.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3-5/16" O.D. 6.88" h x 4-3/4" w.
|
Metal construction. Fits 1/2" IPS connection. Set screw style.
|
2" PVC offset shower drain with receptor base. Solvent welds over 2" schedule 40 DWV pipe. Universal 4-1/4" Snap-Tite strainer. Drain body provides 1-1/2" offset to work around joists and imperfect slab penetrations. Drain body is sealed to shower base with rubber gasket and fiber slip washer.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Durable plastic construction. Designed to fit the Danco hair catcher for shower drains (Model #?s: 10533, 10529). Stops hair and other particles from going down the drain
|
Zinc body; chrome plated finish with reducer bushing. For 3/4'' or 1/2'' pipe.
|
For use on steel, fiberglass and other types of plastic shower bases. Solvent welds to 2" DWV or Schedule 40, ABS or PVC pipe. 4-1/2" flange diameter, with stainless steel grid.
|
|
|
