|
|
|
|
|
|
|
|
|
|
|
|
|
|
Screw mounted on door. 2-1/4" diameter. Used on old style passage locks. Includes 2 rosettes and installation screws.
|
Replacement spindle for antique style door knob systems and square drive systems. 9/32" diameter square drive, threaded shaft. 3-1/2" length. Includes 2 spindles.
|
Heavy-duty diecast housing with brass face and 5 pin tumbler lock. For Kwikset and Weiser locks. Includes 1 key cylinder with trim ring, 2 keys, 1 mounting plate, and 2 screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2" diameter glass knob with brass plated, diecast base. 1-15/16" projection. 9/32" square spindle.
|
One spindle, 2" diameter, used on interior latch sets. Fits 9/32" square drive spindle systems common on antique and vintage door hardware sets.
|
One spindle, 2" diameter, used on interior latch sets. Fits 9/32" square drive spindle systems common on antique and vintage door hardware sets.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mortise caselock with brass plated faceplate. Case hardened steel housing. Spindle hole accommodates 1/4" to 5/16" square shaft. Includes 1 mortise caselock assembly, strike plate, and installation screws.
|
Victorian style 2-3/16" diameter solid brass knobs. Uses a 9/32" square drive, fits old style bit key lock systems. Includes spindle.
|
2 knobs, spindle, and screws included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 knobs, spindle and screws included.
|
3-13/16" diameter. For 2-3/8" or 2-3/4" backset.
|
Rim night latch, surface mount, solid brass latch & hold-open button, brass finish. 5-Pin, 2 pcs brass material key with nickel-plated finish. KD (key different), Kwikset Keyway, with screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Latchbolt operated by knob on either side; both knobs always free. Diecast latch. Glass knobs. Spindle hole accommodates 5/16" star drive, 1/4" to 5/16" square shaft. Use as decorative passage latch for 2-3/8" backset applications. Includes 1 passage door latch, 1 spindle, 2 knobs, 2 rosettes, and installation screws.
|
Diecast locking unit and strike, locks door to jamb to prevent forced entry. Single 5-pin tumbler cylinder. Requires a 1-1/4" hole. Includes tamper-proof shutter guard. Flat strike,
|
Cast steel case lock and keeper. Surface mount design. Brass plated steel knobs and rosettes. Skeleton key system. Used on non mortise applications. Includes 1 lock, 1 keeper, 1 key rosette, 1 knob rosette, 2 knobs, and 2 keys.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rim Deadlock, Surface Mount with 1" Hardened Deadbolt, Brass Finish. 5-Pin, 2 pcs, Brass material, Key with Nickel Plated Finish, KD (Segal Keyway), Kwikset Keyway, with screws.
|
Cast steel case lock and keeper. Surface mount design. Brass plated steel knobs and rosettes. Skeleton key system. Used on non mortise applications. Includes 1 lock, 1 keeper, 1 key rosette, 1 knob rosette, 2 knobs, and 2 keys.
|
Fluted glass knobs with brass plated steel trim plates. Case-hardened steel housing. Lock bolt is key activated both inside and outside. May be used for left or right hand installations. Includes 1 mortise caselock assembly, 2 knobs, 2 trim plates, strike plate, and installation screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Glass knobs on case-hardened steel. Lock bolt is key activated both inside and outside. Latch bolt is reversible for right or left hand installations.
|
Jimmy-proof lock, Single cylinder with shutter guard feature, 5-Pin, 2 pcs brass material key with nickel-plated finish, KD (key different), Kwikset Keyway, with screws.
|
Steel knob with brass plating. For home and office use. Includes trim plate, strike, knob and two keys. Deadbolt locks from both sides. 2-3/8" backset. 3"L x 9/16"W x 3-7/8"H overall dimensions, 2-9/32"W x 7-1/16"L trim plate.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Glass knobs on case-hardened steel. Lock bolt is key activated both inside and outside. Latch bolt is reversible for right or left hand installations.
|
Shutter guard feature. For home and office use.
|
Exterior sectional lever trim for Tell 8300 and 8400 series panic device; comes with a fixed Schlage "C" cylinder (on applicable functions).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Exit device with lip pull trim; baked aluminum enamel; fits doors 28" to 36" wide.
|
3'0" standard door width, can cut down to fit 2'8". Includes interior bar and exterior lock cylinder with pull trim. Stainless steel latchbolt for trouble free operation. For use on 1-3/4" thick door. Easy to install with SC-1 Keying for security. Completely reversible for left or right hand door applications. U.L. Approved for Panic Hardware.
|
3'0" standard door width, can cut down to fit 2'8". Includes interior bar and exterior lock cylinder with pull trim. Stainless steel latchbolt for trouble free operation. For use on 1-3/4" thick door. Easy to install with SC-1 Keying for security. Completely reversible for left or right hand door applications. U.L. Approved for Panic Hardware.
|
|
|
|
|
|
|
|
|
|
|
|
|
3'0" standard door width, can cut down to fit 2'8". Includes interior bar and exterior lock cylinder with lever trim. Stainless steel latchbolt for trouble free operation. For use on 1-3/4" thick door. Easy to install with SC1 cylinder for security. Completely reversible for left or right hand door applications. U.L. Approved for Panic Hardware.
|
|
|
